SESSÃO DE ABERTURA - Strategies for Benefiting Roadworthiness
Johan Cobbaut (CITA President)
Welcome and introduction
Julio Tejedor (Representative of the co-hosts and ACEA President, Spain)
Discurso: Welcome Speech.
José Manuel Prieto (Head of the Vehicle Regulations and Type Approval of the Ministry of Industry, Energy and Tourism, Spain)
Apresentação: Highlights of Roadworthiness in Spain.
Johan Cobbaut (CITA President)
Apresentação: Strategies for Benefiting Roadworthiness.
Walter Nissler (Policy Officer, Road Safety Unit, DG Mobility and Transport, European Commission)
Apresentação: The European Commission Proposal for a New Roadworthiness Package: Considerations on Costs and Benefits.
SESSÃO PLENÁRIA 1 - Challenges of New Technology for Technical Inspection
Orador 1: José Luis San Román Garcia (Full Professor and Head of Mechanical Engineering, University Carlos III de Madrid, Spain)
Apresentação: Contribution of Periodic Motor Vehicle Inspection (ITV) to Road Safety in 2011: M1, N1 and Motorcycle.
Orador 2: Frank Leimbach (Director Technology Centre, DEKRA Automobil GmbH, Germany).
Apresentação: Driver Assistance Systems: Status Quo and Future Impact on PTI. Preliminary findings of the VFSS Group.
SESSÃO PLENÁRIA 2 - Making PTI More Attainable for Developing Countries
Orador 1: Juan A. Ramos Garcia (Chief of the Vehicle Regulations and Transport Innovations Section & Secretary of the World Forum for Harmonization of Vehicle Regulations (WP 29), UNECE Transport Division)
Apresentação: Developing Relevant International Standards.
Orador 2: Noel Brett (Head of RSA, Ireland)
Apresentação: Managing Public / Private Relationships in Ireland.
Orador 3: Dr Thomas Klukas (CITA Bureau Permanent Representative for RAG Africa and Executive Vice President Automotive Services, SGS - Société Générale de Surveillance SA, Switzerland (Presented by Ferose Oaten).
Apresentação: Lions on the Move.
SESSÃO PLENÁRIA 3 - Type Approval and PTI/RSI Standards; an Integrated Approach for the Future
Orador 1: Dr Roland Krause (Director, DEKRA Automobil GmbH)
Apresentação: Relation Between PTI Regulations and Type Approval Regulations Using the Example of Advanced Driver Assistance Systems.
Orador 2: Axle Richter (Head of Automotive & International, TÜV NORD Mobilität, Germany)
Apresentação: Area of Conflict Between Type Approval and PTI Requirements in the Field of Exhaust Emissions.
Orador 3: José Manuel Prieto (Head of the Vehicle Regulations and Type Approval of the Ministry of Industry, Energy and Tourism, Spain)
Apresentação: The legal Life-Cycle of the Vehicle. Type Approval Data Accessible for PTI.
Orador 4: Michel Loccufier (Engineer Director, Head of Unit, Vehicle Regulations, Federal Public Service Mobility and Transport, Belgium)
Apresentação: PTI and Type Approval.
SESSÃO PLENÁRIA 4 - Other Strategies for improving Roadworthiness
Orador 1: Alastair Peoples (Chief Executive Officer, Vehicle & Operator Services Agency, Great Britain)
Apresentação: Improving Recall Response Rates.
Orador 2: Dr Gerd Neumann (Managing Director, DEKRA Automobil GmbH, Germany)
Apresentação: First Experiences with the Introduction of a New PTI Directive in Germany.
Orador 3: Viktor Kretzschmann (Managing Director, TÜV Rheinland and Director of the Quality Management Association in Germany (QM e.V.), Germany)
Apresentação: Quality Management in PTI. Requirements for the European Harmonization of PTI. Common protection Objectives and Efficient Evaluation Methods.
Workshop 1 (A): Challenges of New Technology for Technical Inspections
Orador 1: Frank Ramowsky (Global Head of E-Mobility, TÜV Rheinland Holding AG, Germany)
Apresentação: Challenges of New Technology for Technical Inspection.
Orador 2: Rainer Krautscheid (ORR, Federal Highway Research Institute (Bast), Germany)
Apresentação: New Inspection Methods for Electric and Hybrid Vehicles.
Orador 3: Joachim Wein (Officially Recognized Expert for Single Approval and PTI, TÜV NORD Mobilität, Germany)
Apresentação: PTI for Road Vehicles with Electric Drive.
Orador 4: Bernd Tetycka (Product Management, AVL DITEST, Austria)
Apresentação: Confirming Safety of Electric and Hybrid Electric Vehicles.
Orador 5: Kazuro Kurihara (Chief Executive, National Agency of Vehicle Inspection (NAVI), Japan)
Apresentação: Advancement of Vehicle Inspection in Japan.
Orador 1: Antonio Multari (Director Project Management, MAHA Maschinenbau Haldenwang GmbH & Co. KG, Germany)
Apresentação: OBD VS. Tailpipe Testing – Future Test Options for Emission Control System of Modern In-Use – Extension to Non-Road Vehicles.
Orador 2: Christophe Nolte (Head of Quality Management, DEKRA Automobil GmbH, Germany)
Apresentação: Options for Brake Testing at PTI by Using OBD – and Specific Vehicle Information.
Orador 3: Eva Morger (Quality & Environmental Manager, Bilprovningen, Sweden)
Apresentação: “E-diagnosis” Test of OBD Systems.
Orador 4: Gerd Mylius (Head of Center of Competence, TÜV Rheinland Kraftfahrt GmbH, Germany)
Apresentação: Granting and Effectiveness of Type Approvals and the Operating Licenses for the Individual Vehicle. TUNE IT SAFE! – The Campaign for Safe Tuning in Germany.
Workshop 2 (B): Making PTI more Attainable for Developing Countries
Orador 1: Harald Zwetkoff, President (Controlar S/A and Ingo Albes, Head of International Business Development Vehicle Inspection, TÜV NORD-Mobilität, Germany)
Apresentação: Case Study for an Emerging Country: PTI Introduction in Brazil.
Orador 2: Gerhard Müller (External Affairs & Public Policy, Member of the Managing Board TÜV SÜD Auto Service GmbH, Germany)
Apresentação: Establishment of a Test Center in India – General Information and First Experiences.
Orador 3: Emre Büyükkalfa (Corporate Development Director, TUVTURK, Turkey)
Apresentação: “TUVTURK: Rewriting the Vehicle Inspection System in Turkey”.
Orador 4: Guillermo E. Rodríguez Martin (Technical Director, AECA-ITV, Spain)
Apresentação: Management of Digital Documents: AECA Corporate Intranet and Web Services to Vehicle Manufacturers.
Orador 1: Melvin Van Wyk (Divisional Manager, Transport and Information Regulatory Services)
Apresentação: Roadworthiness in Namibia
Orador 2: Philippe Joyeux (Directeur Général , SGS Maroc Automotive SA, Casablanca, Morocco)
Apresentação: PTI in Africa: The Moroccan Experience.
Orador 3: Ferose Oaten (Managing Director AVTS Roadworthy Stations - Member of TÜV SÜD South Africa Holding (PTY) Ltd., South Africa)
Apresentação: Roadworthy Testing Environment from an Industry Perspective.
Workshop 3 (C): Advances in Test Equipment
Orador 1: Miguel Ángel Estrella Pérez (Electronic Engineer and Quality Unit Manager, VEIASA, Spain)
Apresentação: Inspection of Noise in L-Vehicles in VEIASA.
Orador 2: Manfred Rudhart (Product Management, MAHA Maschinenbau Haldenwang GmbH & Co. KG., Germany)
Apresentação: Complex Light Systems Require Precise Measuring Equipment – Digital Headlight Checking and Adjustment.
Orador 3: Davide Iacovelli (Key Account Manager Test Organisations, Beissbarth, Germany)
Apresentação: New Test Method to Check Taxameters.
Orador 4: Thomas Schulz (Sales Director Export, MAHA Maschinenbau Haldenwang GmbH & Co. KG, Germany)
Apresentação: E-Mobility: Recuperation Test with Function and Performance Dynamometers.
Orador 1: David Vayssié (Managing Director of ACTIA MULLER and President of GIEG (French Association of Equipment Manufacturers), France)
Apresentação: Integrity of Data in Vehicle Inspection Process.
Orador 2: Georges Petelet (Business Developer, CAPELEC, France)
Apresentação: Opacity and NOx Measurement are Reflecting the Health and Operating Status of Diesel Euro 5/6 Engines.
Orador 3: Dr Harald Neumann (Vice-President Engineering, Robert Bosch GmbH, Germany)
Apresentação: Holistic Approach to Vehicle Test Station.
Orador 4: Georges Petelet (Business Developer, CAPELEC, France)
Apresentação: Secured Data Collection.
SESSÃO DE ENCERRAMENTO
Report Back from Workshop 1 (A) chaired by Dr Thomas Aubel (Ron Oliver)
Apresentação: Report Back from Workshop 1: Challenges of new technology for technical inspection.
Report Back from Workshop 2 (B) chaired by Emre Büyükkalf
Apresentação: Report back from Workshop 2: Making PTI more Attainable for Developing Countries.
Report Back from Workshop 3 (C) chaired by Arne Willersley Legrand
Apresentação: Report back from Workshop 3: Advances in Test Equipment.
Closing remarks by the CITA President
Recommendation n.º 01 | Inspection of vehicles in categories M, N and O.
Recommendation n.º 02 | Vehicles carrying passengers - Category M2 and M3.
Recommendation n.º 03 | Relating to the features of measuring apparatus.
Recommendation n.º 04 | Decisions to be taken with reference to the technical modifications carried out on vehicles in use.
Recommendation n.º 05 | Inspection of Vehicles in Category L.
Recommendation n.º 06 | Inspection of the installation and operation of LPG equipment for the propulsion of motor vehicles.
Recommendation n.º 07 | Inspection station equipment.
Recommendation n.º 08 | Brake testing of heavy vehicles and cars.
Recommendation n.º 09 | Quality systems for vehicle Inspection bodies.
Recommendation n.º 11 | Items to be inspected at the roadside, methods of inspection and principal reasons for rejection.
Recommendation n.º 12 | Verification of road speed limiter systems.
Recommendation n.º 13 | Quality measurement methods for vehicle inspection.
Recommendation n.º 15 | European Database for PTI Purposes.
Recommendation n.º 17 | The role of supervisory bodies for vehicle inspection operators under CITA R9B.